Description

Material: UV Glue
Viscosity cps(25 ℃): <110
Curing time(25 ℃): Depend on UV intensity
Hardness ( Shore D): ≥75
Tensile shear strength: ≥ 10MPa

Use Steps:

1. Depending on the material surface treatment, surface dry and clean, no weak boundary layer.

2. Interface adhesive bonding material on the need for continuous coating, be careful not to disperse.

3. Light positioning the glue into the short ultraviolet curing lamp radiation, until the hand nudging fixed.

4. Full cure time high radiation, until fully cured, note the temperature is not too high.

5. Dipped in acetone, alcohol, cleaning materials with a soft cloth or paper towel and gently wipe the bonding good material.